Limited Lifetime Warranty

STAINLESS STEEL UNDERMOUNT SINKS

Complies with ASME A112.19.3-2000

270278 - 1M - 10/2007

Artisan warrants to the original owner that they will provide an equivalent sink

(excluding labor for reinstallation and transportation) to replace any Artisan Stainless

Steel sink that becomes defective provided that the sink has been solely for residential

use and has not been damaged due to abuse, misuse, or negligence.

To validate a warranty claim, the owner must be able to show that they are the

original owner of our sink. Artisan has the right to inspect any sink reported to be

defective prior to replacement of the sink. All decisions are final. Replacement of the

sink does not include removal of the defective sink or installation of the replacement.

Artisan shall not be liable in case of:

• Improper installation or modification of an Artisan sink

• Damages resulting from abuse including dents resulting from impact of dropped objects

• Damages resulting from improper care or maintenance

• Normal use including scuffs or scratches

• Improper use (such as exposure to corrosive chemicals or cleaning compounds)

• Commercial use

Disclaimers. EXCEPT AS SET FORTH ABOVE, MANUFACTURER MAKES NO

WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY REGARDING

OR RELATING TO THE PRODUCT OR SERVICE SUPPLIED HEREUNDER. THE

PRODUCT MANUAL, OR ANY MATERIALS OR SPECIFICATION PROVIDED BY

MANUFACTURER, DOES NOT PROVIDE ANY WARRANTY WHATSOEVER. TO

THE GREATEST EXTENT ALLOWED BY LAW, MANUFACTURER SPECIFICALLY

DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE (EVEN IF MANUFACTURER HAD BEEN

INFORMED OF SUCH PURPOSE) WITH RESPECT TO THE PRODUCT.

Limitation on Damages. To the greatest extent allowed by applicable law, manufacturer

shall not be liable for any special, indirect, exemplary, incidental or consequential

damages arising out of or in connection with the product, any other materials or services

furnished hereunder, even if manufacturer has been advised, knows or should know of

the possibility of such damages. The preceding constitutes manufacturer’s entire liability

and your sole and exclusive remedy for breach of warranties herein set forth. (Some

states do not allow the exclusion or limitation of implied limited warranties, so the

above exclusion may not apply to you.) This warranty supersedes all other warranties,

expressed or implied. The foregoing warranties are exclusive and made only to the buyer.

Cleaning Instructions

STAINLESS STEEL SINKS

Complies with ASME A112.19.3-2000

270175 - 1M - 10/2007

Artisan Stainless Steel Sinks are made from high quality 16 guage, 304 Stainless

Steel. Its heavy duty 16 gauge material is extremely durable and rust-free. Artisan’s

state-of-the-art manufacturing offers you a premium brushed metal finish that is easy

to keep clean and as new as the day you purchased it. Simply follow these Easy-Care

Instructions.

General Care and Cleaning:

You should rinse, wash with soap and clean water, and thoroughly dry your sink after

each use. NEVER use any abrasive cleaners, steel wool or scrub pads as they will dull

and tarnish the finish.

Suggestions to remove scratches in your stainless steel sink:

If light scratches occur, they can be softened by using an abrasive pad such as a

Scotch Brite,® and a product called Bar Keeper’s Friend.

Follow these simple steps:

1. Sprinkle Bar Keeper’s Friend on a thoroughly wet cloth or pad.

2. Rub the surface gently using long uniform strokes in the

same direction as the current polishing lines.

3. Rinse thoroughly with clear water.

4. Wipe dry to prevent water spots.

Note: This will not eliminate deep scratches but will will definitely improve the

scratched surface considerably.

Cleaning Instructions

COPPER FARMHOUSE & VESSEL SINKS

Complies with ASME A112.19.3-2000

280233 - 3/2008

Artisan handcrafted Copper Sinks are designer-inspired. Each sink is one-of-kind,

presenting traditional period styling with its own unique, naturally beautiful finish.

The brushed metal finish is easy to keep clean and will always be distinctively beautiful

as long as you follow these Easy-Care Instructions.

Copper develops its own rich warm patina as it is used and ages. You’ll notice the rich

reddish color varies from sink to sink and may, in fact, present dark spots or streaks due

to the nature of the sink and the finish. The Artisan sink has been designed to bring out

this beauty.

General Care and Cleaning:

Care is simple and easy. Under normal use, copper will develop its own warm and rich

patina. To preserve that look, use only a gentle mild soap and water to clean the surface.

No other cleaners are needed.

If a bright shiny “new Copper” look is desired, use non-abrasive copper cleaners and

follow directions carefully.

Whichever look you desire, it is important to keep the copper sink basin and drain dry

to avoid water spotting or pitting. Wipe the basin periodically with a soft dry cloth. To

maintain luster and improve water runoff, use Renaissance Wax or a similar product.

Cleansers or Corrosive Substances:

NEVER use abrasive materials or harsh chemicals on an Artisan sink. They will scratch

the surface and finish of your sink.

NEVER use chlorine bleach or cleansers, concentrated vinegar, abrasive cleaners, or any

other harsh chemicals since these may damage the sink finish.

Acidic Foods:

NEVER leave acidic foods such as oranges or lemons, tomatoes, tea, etc. on your sink.

If you do, you may experience shiny spots.

If spotting does occur, we recommend cleaning the sink with soap and water and then

waiting for the finish to recover to its natural patina. As the sink ages, the spots will blend

with the surrounding areas, returning the finish to the rich natural patina you love.

Contact us today!
We welcome your questions and queries. Please see our Contact Us page for complete contact information.